Course Page
If you have no experience with FANUC software, Industrial Electronics, or programming of any kind - and are starting from scratch, you should review these pages in the following order. Note that this order is distinct from the course itself and the labs are taken from the internet and may differ from the labs written for the MH-142 physical class.
Introduction Materials
The following should be finished prior to working on the physical robot.
- Safety (This page is under construction)
Basic Materials
The following should be started as you begin working on the physical robot.
- Robot Hardware
- Teach Pendant Basics (This page is under construction)
- Jogging
Novice Materials
The following are novice-level materials that will get you to creating simple programs.
- Frames (This page is under construction)
Intermediate Materials
The following are intermediate materials to get you creating real programs that can work in the field.
- Data (This page is under construction)
- Non-Motion Instructions
- Programs
General Reference Materials
The following are reference pages, good for information and should be reviewed periodically to help your understanding.
The following goes beyond the scope of our first semester course, but are good for reference since you'll still have access to this in the future.