Teach Pendant: Difference between revisions
→Tool 1 and Tool 2
(→COORD) |
|||
| (14 intermediate revisions by the same user not shown) | |||
Line 1:
The teach pendant is the main user interface for the FANUC robots. It is a handheld device with a color touchscreen, a custom keypad, and various safety devices such as a deadman switch, emergency stop, and enable switch that can be swapped out with a key switch for security.
While simulators are available for writing and testing programs, the Teach Pendant is the primary tool in which a robotic operator will create, test, and modify programs on the robot.
=='''Variations'''==
Over the years [https://www.fanuc.eu/ua/en/robots/accessories/robot-controller-and-connectivity/ipendant-touch FANUC has upgraded the teach pendant] with newer technology to make it more user-friendly. Adding larger, sharper color displays, overlaying with touchy screens, and generating a sleek UI are some of the changes made in the past 20 years.
Line 38 ⟶ 43:
desc none
</imagemap>
===Physical Buttons===
On the left of this page is an image of the teach pendant buttons. Each button is '''clickable''' and will take you to the section or dedicated page detailing the button's purpose and use. The buttons are also listed below, linking to any respective pages.
Line 52 ⟶ 58:
<br />
<br />'''<u>The following buttons have their own wiki pages detailing their use and result:</u>'''
Line 69 ⟶ 80:
'''<u>The following buttons are detailed on this page:</u>'''
====
The reset button attempts to clear all alarms that are appearing. If there are any remaining, it will display at the top of the screen in RED to let you know to fix it. Most commonly this includes emergency stop buttons, the teach pendant switch, the deadman. Once you have fixed your errors, press reset again and if none remain - the status will turn GREEN at the top, signaling that you have now enabled motion.
POSN displays the current position of the robot. This is useful for manually editing positions and position registers, measuring distances and positions, and confirming the accuracy of frames.
Line 75 ⟶ 89:
The screen includes a single softkey:
*
** JNT - JNT gives the angular positions of each axis. These are in reference to the "witness marks" scratched into the robot to designate a zero position. They can be positive or negative. On some joints and robots, they may even be greater than 360, if the joint is designed to rotate several times or continuously.
**
**
====
====
====
====
The shift button has two functions: Modify and Enable.
While the shift button is held, the keys with some blue on them change their functions. Speed increases and decreases by a much greater amount, arrow keys navigate entire pages at a time instead of just individual items, and the COORD key opens up a menu for changing frame numbers, instead of just frames.
▲==== I/O ====
The jog keys however, are completely disabled unless SHIFT is held down. Any manual jogging of the robot be preceded by pressing and holding the SHIFT key.
The I/O button opens up the page listing the last I/O type opened.
[[File:Digital Output Screen.png|thumb|450x450px|This is the Digital Output Screen.]]
*
* [TYPE]
** Cell Intface
** Custom
**
**
** Group
**
**
**
**
**
**
*
**
*
*
**
**
*
==== DISP
* Single
* Double
*
*
*
*
*
*
**
**
**
**
**
*
*
* User Views
**
**
* Menu Favorites
*
*
*
====
*
**
** Version ID
**
**
**
** Prg Timer
**
**
**
**
*
*
* PULSE
*
**
**
*
*
*
*
==== SET UP
#
#*
#*
#*
#* OTHER
▲# Production start method: Production Checks:
▲#* UOP
▲#* OTHER
▲# At home check:
##
##
▲# Resume position toler.:
##
##
▲# Simulated I/O:
##
##
#
▲## DISABLED
▲## ENABLED
▲# Prog override <100%:
## DISABLED▼
## ENABLED▼
# Machine lock:▼
## DISABLED▼
## ENABLED▼
# Single step:▼
## DISABLED
## ENABLED
# Process ready: General controls:▼
# Heartbeat timing:▼
## 1000 MS
# Low TEMP DRAM memory:
##
#
## 50 KB
<br />
====
Function is a menu of options relating to the teach pendant and controller states.
*
* Disable FWD/BWD
*RELEASE WAIT
*QUICK/FULL MENUS
* SAVE
*PRINT SCREEN
*PRINT
Line 218 ⟶ 237:
*START MODE
**CANCEL
** COLD
**CTRL
*ENABLE HMI MENU
* REFRESH PANE
*LIVE/SNAP
*VISION SETUP
*Diagnostic log
* Del Diag Log
====Tool
These keys are most commonly designated as "Macros", allowing you to assign functions to them by creating Macro programs. A macro is something you want quick access to "on the fly" to make things easier.
Coord is used for changing between available jogging coordinate systems. Holding SHIFT and pressing COORD will let you select specific frame numbers.▼
In our lab, we have the tool buttons designed for toggling the gripper tool and vacuum tool.
▲==== GROUP ====
====
[[File:Blank Page - COORD menu.png|thumb|COORD (Shifted)Using the arrow keys, you can select a type of frame, Tool, Jog, and User - then enter a number to change that frame type to.]]
Coord is used for quickly changing between available jogging coordinate systems.
Each time you press COORD it will cycle through the available frames.
==== FWD/BWD ====▼
▲
Use the arrow keys to select which frame you wish to change, then enter the number of the frame you wish to change to.
Since there are 10 available tool frames, the period button represents Tool Frame 10.
==== GROUP====
====SPEED ====
Speed keys set how fast the robot will move when jogging, and adjust the speed at which motion instructions are executed.
Pressing the up speed arrow increases speed by a fine amount. Pressing the down speed arrow decreases speed by a fine amount.
Holding SHIFT while pressing either speed key will adjust the speed in larger increments, allowing you to quickly get to a high or low speed. Letting go of the SHIFT key and pressing the speed will let you fine-adjust again.
Holding SHIFT and pressing FWD will initiate a run-through of your program. If STEP is active, hitting forward will advance the program by one line.
Line 242 ⟶ 281:
Note that backing through your program in this method will not perform the reverse functions on IO or registers, just motion.
====
====
[[File:Step indicator.png|thumb|Notice the Step indicator is yellow, indicating the program will run through one step at a time.]]
This button toggles STEP mode. When disabled, the STEP indicator on the top of the screen will go green. This causes a run-through of your program to be continuous.
Line 251 ⟶ 290:
https://motioncontrolsrobotics.com/discover-benefits-fanuc-teach-pendant/
__NOTOC__
| |||